Apacer Technology II Bedienungsanleitung PDF herunterladen (Seite 2)

CFast

APCFAxxxxQAHS-XXDCM

Features:



Standard Serial ATA 2.6 (Gen. 2)

– SATA II, 3.0 Gbps

– ATA-compatible command set

– ATA modes support



Connector type

– 7 + 17 pin female connector



Power consumption (typical)**

– Supply voltage: 3.3V

– Active mode: 315 mA

– Idle mode: 85 mA



Performance**

– Sustained read: Up to 160 MB/sec

– Sustained write: Up to 85 MB/sec



Capacity

– 8, 16, 32, 64, 128 GB



NAND Flash Type: MLC



MTBF: >1,000,000 hours



Temperature ranges

– Operation:

Standard: 0°C to 70°C

Extended*: -40°C to 85°C

– Storage: -40°C to 100°C



Intelligent endurance design

– Built-in hardware ECC, enabling up to

16/24 bit correction per 1K bytes

– Dynamic/Static wear-leveling scheme

together with dynamical block

allocation to significantly increase the

lifetime of a flash device and optimize

the disk performance

– Flash bad-block management

– S.M.A.R.T.

– Power Failure Management

– ATA Secure Erase

– TRIM



RoHS Compliant

*Extended temperature is available from 16 to 128GB capacities.

**Vary from capacities. The values presented in Power consumption and Performances are typical, and may vary depending on

different settings and platforms.

1 2 3 4 5 6 7 ... 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare

Apacer Technology II Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Apacer Technology II